ECOline NET – Versatile surface heating system with countless applications

ECOline NET is a system that can be successfully installed outside and inside the buildings. A distinctive feature of this system is its versatility – it can be used on different types of substrate, such as thermal insulation on concrete substrate, directly on concrete substrate or directly on the ground. The design of a panel radiator can vary, but it always has one thing in common, which is the attachment of the pipes to a metal reinforcing mesh or a system mat. This enables surface heating of surfaces with increased mechanical strength.

The ECOline NET system is therefore ideal for large buildings such as warehouses and production halls, livestock buildings, office buildings, as well as for heating the ground slab in residential construction. Due to the considerable surface areas and the layout of the ceiling or hob reinforcement, the pipes are laid in parallel, usually in the form of a double meander.

Another equally professional area of application for the ECOline NET system is car parks and external traffic routes where increased mechanical load resistance is required.

The system includes:

1. Steel wire mat
2. Fastening band for connecting nets
3. Clamp or plastic bands to fasten pipes
4. ECOline NET system pipes

The system is supplemented by traditional ECOLine surface heating manifolds and ECOline pipe manifolds laid in accordance with the Tichelmann principle.

Depending on the needs arising from the project, the ECOline NET system can use  ECOline PE-RT pipes. These are homogeneous pipes made in five-layer technology (5L), where all layers are permanently combined, and thanks to the use of polyethylene with increased thermal resistance PE-RT (type I) and its high elasticity, ECOline PE-RT pipes perform excellently also during installation at low temperatures. The range of ECOline pipes includes diameters of 1/2″-1″ mm. They are offered in standard coils .

The ECOline NET system is also used to construct so-called thermally activated partitions such as heating ceilings and vertical load-bearing walls. ECOline NET system pipes are fastened to the bottom or top reinforcement with pipe clamps or pipe bands, depending on their intended use.

The installation of heating loops from ECOline pipes supplied in coils is facilitated by a dedicated coil-adjustable uncoiler, making the work quicker and easier. 

The ECOline NET system makes efficient use of the building structures required for the project. This makes it possible to reduce significantly subsequent investment costs in the area of heating or cooling the building.